Features
Built with strength.
Our continuous square tubular frame was designed for enhanced strength and durability.
Redefining comfort.
Settle in to a fully adjustable command center and experience next-level comfort designed for optimized speed and control from head to toe.
AeroForce Deck™
The Aeroforce™ cutting system results in finer clippings, fewer clumps, reduced stragglers and increased evenness. Fully welded and fabricated with a limited lifetime fabricated deck shell warranty.
Specifications
| Engine | |
| Engine Brand | Cub Cadet |
| Engine Output | 679cc |
| Fuel Tank Capacity | 3.5 gal. |
| Cylinders/Material | Twin |
| Starter Type | Key |
| Engine Oil Capacity | 2.0 qts. |
| Lubrication | Fully pressurized |
| Charging System | 12 Amp Regulated |
| Governor | Manual |
| Choke | Separate choke and throttle |
| Air Filter | Dual element |
| Oil Filter | Yes |
| Battery | |
| Battery | 12V 300 cold crank amp |
| Drive System | |
| Transmission | Hydrostatic, dual |
| Forward Speed | 7 MPH |
| Reverse Speed | 3.5 MPH |
| Rear Axle | 1" |
| Transmission Housing | Cast aluminum |
| Transmission Type | Hydro-Gear EZT 2200 |
| Cutting Deck | |
| Deck Cutting Width | 46" |
| Cutting Modes | Discharge/mulch/bagging |
| Deck Wash | SmartJet deck wash system provides high pressure water that cleans out grass and debris build-up under the deck |
| Deck Material | 11-gauge fabricated steel |
| Deck Attach/Removal | Removeable |
| Deck Engagement (PTO) | Pull knob (electric) |
| Deck Construction | Fabricated |
| Spindle Construction | Sealed cast aluminum housing (Maintenance free) |
| Blade(s) | 2 |
| Deck Lift | Foot pedal with Dial Adjust |
| Cutting Height Range | 1" - 4.5" |
| Anti-Scalping | 2 ball |
| Deck Positions | 15 Positions |
| Chassis | |
| Frame | 2'' x 2'' tubular steel frame |
| Front Axle | Steel |
| Front Caster Mount | Sealed ball bearings |
| Turning Radius | Zero degrees |
| Front Tires | 11"x6"-5" |
| Rear Tires | 20"x8"-8" |
| Tire Tread | Turf Master/Multi Trac |
| Protection | 2" x 2" Tubular steel bumper |
| Rear Tow Hitch | Standard |
| Corrosion Protection | Triple Guard Corrosion Defense System™ |
| Yokes | 1/4" steel yokes provide greater durability |
| Controls | |
| Handle | 3- way adjustable ergonomic lap bar |
| Brakes | Lap bar integrated |
| Steering Control | Lap Bars |
| Mow in Reverse | Standard |
| Comfort | |
| Seat Type | 20" high back seat |
| Seat Suspension | Advanced polymer seat suspension system optimizes comfort while reducing operators fatigue |
| Floor Mats | Rubber |
| Steering Comfort | Quick adjustable (no tools) Soft Touch lab bars |
| Dimensions | |
| Dimensions | L/W/H80'' x 58'' x 47'' |
| Weight (approx.) | 570 lbs. |
| Additional Specifications | |
| Mulch Kit | Optional |
| Headlight(s) | Illuminating Dual-LED Headlights provide ultimate vision for mowing in low light conditions |
| Discharge Chute | Included |
| Cup Holder | Included |
| Bagger | Optional |
| Model Number | 17AAEACN010 |
| Specifications | |
| Series | Ultima Series™ ZT |
