EasyCut F 280 • F 320
- Powered top hats windrow the material for the tractor to straddle it
- Uniform windrow presentation
- A continuous and consistent crop flow
The KRONE EasyCut F 280 and F 320 stand out for their massive top hats which mount behind the discs on either end of the cutterbar. Driven from within the cutterbar, they provide a consistent flow of crop to the centre of the machine so that the tractor wheels will not run on the fluffy swath and the harvester will pick up the material without losses.
Powered top hats: With all discs turning towards the middle on the EasyCut F 280 and F 320 models, they automatically feed the cut material to the middle whilst the powered top hats control the fl ow to the rear. It is down to their high feed capacity that the material is presented in uniform windrows, even on the slope.
Narrow windrows: EasyCut F 320 can take taller top hats which are bolted to the smaller standard-fit hats on the inside. The taller hats reduce the windrow width by another 40 cm (1'4") for narrow tractors to straddle them.
Want wider windrows? Our EasyCut F 320 models feature small inner hats along with the tall hats – an ideal configuration when matching up with a wide spreading rear mower.
A perfect system: EasyCut F 280 and F 320 are mowers that adapt to any type of ground contours – in and across the direction of travel. The pushed design allows for plenty of up and down travel – the ideal design for rough terrain. In addition, the compact build offers an excellent overview in the field and an excellent transport stability for safe travel on public roads. As it mounts close to the tractor, the linkage travels through a smaller angle and less strain is put on the driveshaft.
A good follower Pivoting through a large 40 cm (1'3'') range, these disc mowers follow any ground contour, produce clean forage and leave a healthy sward.
Protection all-round: Rubber strips grab the edge of the side and front guards to serve as bumpers and reduce collision damage and preserve the machine’s value.
Centre-of-gravity suspension: Maintaining the set pressure across the full work width, our EasyCut F 280 and EasyCut F 320 models stand out for less wear, light pull and perfect cuts.
Fold-up guards: The guard ends on the KRONE EasyCut F 280 and EasyCut F 320 front disc mowers fold back to bring the machine’s transport width down to 3.00 m (9'10''). The hydraulic guard ends are options and require a double acting spool.