Krone BiG X 1100

Krone BiG X 1100 for sale at Hines Equipment, A full-service equipment dealer in Central Pennsylvania.

Double tap to zoom

Krone BiG X 1100 for sale at Hines Equipment, A full-service equipment dealer in Central Pennsylvania.

 

Features

The intake system 

Quality six times over

  • 6 pre-compression rollers for a top quality chop
  • Hydraulic drive:
    LOC steplessly adjustable from cab, adjusts automatically with AutoScan
  • Maximum protection against foreign objects: long path from metal detector to chopping drum metal detection across entire chamber width 

Constant, safe and convenient: Six pre-compression rollers and an 820 mm gap between the leading roller with metal detector and the rearmost roller not only enhance pre-compression but also protect the blades better against metal objects, even at high-speed intake. The hydraulic drive shaft automatically adjusts the LOC in line with the maturity of the crop, which is detected by the KRONE AutoScan sensor. If the engine speed drops below 1,200 rpm as the load increases, the header and intake system are stopped automatically while the chopping drum continues to turn – because blockages caused by low speeds cost time and money.

Corn conditioner  

Two systems for your success

  • Perfect kernel treatment
  • Huge diameter roller: 250 mm
  • Optional high-performance disc conditioner for BiG X 700, 850 and 1100 with a 2.5 x larger friction surface.
  • Roll gap adjusted conveniently from the cab
  • Perfect treatment: the right teeth for your corn

VariStream 

A KRONE exclusive

  • Consistent performance with irregular crop flow
  • Extremely smooth running even on uneven swaths
  • Maximize throughputs
  • Top quality chop
  • Extremely user-friendly

StreamControl  

Adjustable crop throw

  • Crop throw adjusted at the touch of a button from the cab
  • Tight crop stream even with a long crop throw
  • The shorter the crop throw, the less power is needed
  • Fills the trailer accurately with no spillage

Headers  

Cutting edge

  • EasyFlow pick-up
  • XDisc direct cutting system
  • Variable-row width EasyCollect corn head
  • Suitable for BiG X, quick and easy changeover

 

The Engines

Pure power

  • 8 and 12 cylinder MAN engines
  • Transversely mounted V-engine
  • Huge torque, tremendous power
  • Guarantees massive throughputs
 

The driveline 

Stepless control

  • Simple design
  • Chopping drum driven by extra-strong poly V-belts
  • Intake system driven hydraulically
  • Headers driven hydraulically
  • Hydraulic drive shaft

The running gear  

Stepless, strong and nimble

  • Optimum weight distribution Safe on-road travel
  • Hydraulic 4WD: extremely maneuverable, 40 km/h
  • Powerful wheel motors from Bosch-Rexroth
  • Traction control with three travel modes
  • ABS and spring-loaded steered axle

The cab 

The ultimate level of comfort

  • Extremely spacious and quiet
  • Maximum sitting and operator comfort
  • Excellent all-round vision

Well-equipped  

Down to the very last detail

  • Convenient illuminated access steps
  • Chute turns through 210°, with break-back system
  • Spout lined with replaceable wear plates throughout
  • Huge tank volume, with auxiliary and silage additive tank
  • Auto lubricator for more convenience

Specifications

MODEL BiG X 1100
Engine Model MAN V12 D 2862
No. of cylinders 12
Displacement Litres 24.24
Power (to ECE R 120 standard) kW / hp 793 / 1,078
Max. chopping power in X Power mode kW / hp 760 / 1,034
Max. chopping power in Eco Power mode kW / hp 469 / 638
Fuel tank capacity / auxiliary tank gallons 250 / 90
Ground drive  
Type Infinitely variable hydrostatic drive with wheel motors
Speed in field mode mph 0 -14
Speed in road mode mph 0 - 25
4WD & axle separation Standard
Axles  
Steering angle on rear axle Degrees 53
Rear axle suspension Standard - Hydraulic
Drivelines  
Header Infinite variable
Pre-compression rollers Infinite variable
Pre-compression rollers  
Pre-compression roller throat volume Funnel shaped
Service position Quick attach (also with head attached)
No. of rollers / metal detector / no. of magnet coils 6 / Standard / 6
Metal detector to shearbar distance mm 820 (2'8")
Compression force / Throat opening volume 10,141 lbs / 42 gallons
Chop length adjustment Steplessly from cab (0.1 mm increments)
Cutterhead  
Cutterhead width / diameter mm 800 / 660 (2'7"/ 2'2")
Arrangement of knives Chevron arranged at 11° to shearbar
No. of knives 20, 28, 40
Chop length range mm 5 - 29 / 4 - 21 / 2.5 - 15
Cuts / min. 12,500 / 17,500 / 25,000
Stepless adjustment of drum flow /
spring-loaded drum floor
Standard / Standard
Corn-Conditioner  
123 teeth: Straight teeth / chromed saw teeth /
tooth spacing     mm
Option / Option / 6.38 (0.25")
144 teeth: Straight teeth / chromed saw teeth /
tooth spacing       mm
Option / Option / 5.45 (0.2")
166 teeth: Saw teeth / tooth spacing mm Option / 4.72 (0.19")
Roller speed difference      % 30
In-cab roller gap adjustment & automatic
lubrication
Standard
Roller diameter / clearance mm 250 / 0.5 - 10 (10"/ 0.02"- 0.4")
Crop accelerator  
Rotor diameter / Width / No. of paddles 560 / 660 / 8 (1'10"/ 2'2"/ 8)
Paddle arrangement Centered and chevron
Speed rpm 2,360
Stepless adjustment of the back plate /
spring-loaded back plate
Standard / Standard
Spout  
Rotation               Degrees 210
Overhead unloading height        mm 6,000 (19'8")
Cross section                          mm 340 x 230 (1'1.4" x 9")
Automatic rotation / parking function Standard
Stepless speed adjustment Standard
Drive for rotation Gearbox
Spout fully covered with wear liners Standard
Maintenance  
Auto-lube system with compressor Standard
Self diagnostic system via operator terminal Standard
Cab  
Air seat & passenger seat Standard
Auto climate with mobile cool box Standard
Windscreen wiper / side window wiper Standard
Dimensions  
Length / Width* / Height* mm 7,950 - 9,450 / 3,000 - 3,460 / 3,940 - 3,995
(26'1"- 31'/ 9'10"-11'4"/12'11"-13'1")
Base unit weight (without header)** ca. kg 14,800 (32,628 lbs)
Weight distribution with EasyFlow 3001
Pick-up    F / H %
55 - 45
Weight distribution/with EasyCollect 903
(9.00 m w.w.)      F / H %
60 - 40
Tires  
Front axle Standard***
Option
Option
Option
Option
Option
Option
650 / 75 R 32
710 / 75 R 34
800 / 65 R 32
900 / 60 R 32
710 / 70 R 42
800 / 70 R 38
900 / 60 R 38
Rear axle Standard***
Option
Option
540 / 60 R 30
600 / 70 R 28
710 / 60 R 30
Headers  
EasyFlow: Pick-up 3,000 - 3,800 (9'10"-12'6")
EasyCollect: Row-independent header 7,500 / 9,000 / 10,500
(24'7" / 29'6" / 34'5")
Autopilot & Active ground contouring for Corn Head Option
XDisc: Direct Cut Head       mm 6,200 (20'4")
  • CC IndependentElite
  • yanmar
  • Branson logo no background
  • gehl
  • woods
  • hustler
  • ferris
  • krone
  • jaylor
  • hardi
  • h s logo
  • York logo
  • land pride